Alarm detectors in series
Alarm detectors in series
I had 2 failed old Elkron motion alarm sensors (4 core) wired in series as in pictures. They are in adjacent rooms connected through a wall with short cable. They worked well and did the job. I have 2 Texecom Capture P15s to replace. The control panel is Scantronic 9448+. There are no added resistors. Can I just wire these in the same way? Do I need to change the resistor setting inside one or both sensors if in series? Many thanks for any advice.
by john222
This has been automatically posted in the DIYNot Forum on DIY Talk. The new DIY Forum
Alarm detectors in series
I had 2 failed old Elkron motion alarm sensors (4 core) wired in series as in pictures. They are in adjacent rooms connected through a wall with short cable. They worked well and did the job. I have 2 Texecom Capture P15s to replace. The control panel is Scantronic 9448+. There are no added resistors. Can I just wire these in the same way? Do I need to change the resistor setting inside one or both sensors if in series? Many thanks for any advice.
by john222
This has been automatically posted in the DIYNot Forum on DIY Talk. The new DIY Forum